Schluter®-SHELF-W - Rectangular shelf for tiled walls

The Schluter^®-SHELF-W is a rectangular shelf for tiled walls with two trapezoid-perforated anchoring legs for installation while tiling.

• Available in the following designs: FLORAL, CURVE, PURE, WAVE, and SQUARE
• All designs available in 6 TRENDLINE textured color-coated aluminum finishes, as well as brushed stainless steel
• Easily installed along with the tile
• Matching drain grates available

Schluter®-SHELF-W is a wall storage system available in brushed stainless steel or aluminum in a range of textured color-coated finishes including stone grey, cream, greige, bronze, matte black, and matte white. The shelves are 5/32″ (4 mm) -thick and feature designs coordinating with the KERDI-DRAIN and KERDI-LINE drain grates. They can be used in showers and other tiled wall applications (e.g., kitchens and baths). SHELF-W is a rectangular shelf with two trapezoid-perforated anchoring legs for installation on walls in conjunction with the tile.

Schluter®-SHELF-W requires no special maintenance or care and is resistant to mold and fungi. Clean shelves periodically using neutral cleaning agents. Avoid the use of strong acids (e.g., hydrochloric, hydrofluoric) and bases/alkaline cleaners (e.g., bleach, ammonia, chlorides). Do not use abrasive cleaning agents and tools. Even stainless steel requires periodic cleaning, which will maintain a neat appearance and reduce the risk of corrosion. Stainless steel surfaces develop a sheen when treated with a chrome-polishing agent.

Surface - installation in conjunction with tile

1. If the grout joint is less than 5/32″ (4 mm) –thick the tiles must be notched to fit the SHELF-W. Placing the notch in the tiles below the SHELF-W will result in a visually appealing, even line above.

2. Install the tile up to the joint where the SHELF-W will be placed and slide the bottom anchoring leg behind the tile. Provide temporary support as required.

3. Install the remainder of the tile and grout the application.

4. After the grout has set, seal the joint between the SHELF-W and the wall tile on the top and bottom surfaces with sealant that is suitable for the application (e.g., silicone.)

5. Allow the sealant to cure prior to using the SHELF-W.

Теги: Schluter Systems Shelves